DTC Confirmation Procedure

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
TESTING CONDITION:

Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle.

: GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine and let it idle for at least 60 seconds.
2. Check 1st trip DTC.
Is 1st trip DTC detected?

YES: "DIAGNOSIS PROCEDURE "

NO: INSPECTION END