FixVault
Home › Lexus › 2007 › LS 460L › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning › Smog Ventilation Sensor › Installation

Smog Ventilation Sensor: Installation

  1. INSTALL SMOG VENTILATION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 9.8 N*m (100 kgf*cm, 7 ft.lbf) 

    2. Connect the connector.
    Fig 1: Locating Smog Ventilation Sensor Bolt
    G04950821Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL COOL AIR INTAKE DUCT SEAL 
    1. Install the duct seal with the 2 clips.
  3. INSTALL AIR CLEANER INLET COVER 
    1. Install the cover with the 2 clips.
  4. INSTALL ENGINE ROOM SIDE COVER LH 
    1. Install the cover with the 4 clips.
  5. INSTALL ENGINE ROOM SIDE COVER RH 
    1. Install the cover with the 4 clips.
About FixVault