Automatic Transmission Rear Oil Seal: Replacement

REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
1. Remove the propeller with center bearing shaft (see REMOVAL ).
REMOVE AUTOMATIC TRANSMISSION FLANGE YOKE ASSEMBLY

Fig 1: Loosening Nut
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using SST and a hammer, loosen the staked part of the nut.
  SST 09930-00010
  
  HINT:
  
  Move the shift lever to P.
2. Set SST.
  
  Fig 2: Removing Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09330-00021, 09950-30012 (09955-03040)
3. Using SST and a 30 mm socket wrench, remove the nut.
4. Remove SST.
5. Tap out the flange yoke with a plastic-faced hammer to remove it.
6. Using a screwdriver, pry out the oil seal from the automatic transmission flange yoke.
  
  Fig 3: Prying Out Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AUTOMATIC TRANSMISSION REAR OIL SEAL

Fig 4: Tapping Out Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using SST, tap out the oil seal.
  SST 09308-00010
INSTALL AUTOMATIC TRANSMISSION REAR OIL SEAL
1. Coat the lip of a new oil seal with MP grease.
2. Using SST and a hammer, tap in the oil seal.
  
  Fig 5: Tapping In Oil Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09214-76011
  
  Standard depth:
  
  3.5 +/-0.2 mm (0.138 +/-0.008 in.)
INSTALL AUTOMATIC TRANSMISSION FLANGE YOKE ASSEMBLY

Fig 6: Tapping In Oil Seal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using SST and a hammer, tap in a new oil seal.
  SST 09950-60010 (09951-00410), 09950-70010 (09951-07100)
2. Install the automatic transmission flange yoke.
3. Set SST.
  
  Fig 7: Tightening Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  SST 09330-00021, 09950-30012 (09955-03040)
4. Using SST and a 30 mm socket wrench, install and tighten a new nut.
  Torque: 126 N*m (1285 kgf*cm, 93 ft.*lbf)
5. Using a chisel and hammer, securely stake the nut.
  
  Fig 8: Staking Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
1. Install the propeller with center bearing shaft (see INSTALLATION ).
ADJUST AUTOMATIC TRANSMISSION FLUID
1. Add automatic transmission fluid (see AUTOMATIC TRANSMISSION FLUID ).