Mayday Switch: Installation

INSTALL MAYDAY SWITCH ASSEMBLY
1. Install the plate and switch with the 3 screws.
  
  Fig 1: Identifying Screws, Plate And Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the cover with the screw.
3. Connect the connector.
  
  Fig 2: Identifying Screw And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL MAP LIGHT ASSEMBLY
1. Connect the connector.
2. Attach the 4 clips to install the map light.
3. Install the bolt.
  
  Fig 3: Identifying Map Light Assembly Clips With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 2 claws to close the cover.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  
  Fig 4: Identifying Map Light Assembly Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).