Disc Magazine does not Eject

1. Remove the ACC fuse from the cowl side junction block LH.
2. Measure the resistance of the fuses.

Standard resistance: 

Below 1 Ω 

NG: REPLACE FUSE 

OK: Go To Next Step 

1. Disconnect the D32 changer connector.
2. Measure the resistance of the wire harness side connector.

   Standard resistance 

   TESTER CONNECTION AND SPECIFIED CONDITION CHART
   
   

   Tester Connection	Specified Condition
   D32-20 (GND) - Body ground	Below 1 Ω

3. Measure the voltage of the wire harness side connector.

Standard voltage 

NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 

OK: REPLACE DISC PLAYER CHANGER