FixVault

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator and so on without removing any parts. Reading the DATA LIST as a first step of troubleshooting is one way to shorten the labor time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the "DATA LIST" according to the display on the tester.

    Body ECU (Main): 

    BODY ECU (MAIN) REFERENCE

    Item Measurement Item/Display (Range) Normal Condition Diagnostic Note
    KEY UNLOCK WRN SW Key unlock warning SW signal ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder -
    D DOR CTY SW Driver's door courtesy SW signal ON: Driver's door is open OFF: Driver's door is closed -