FixVault
Home › Lexus › 2007 › LX 470 › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › Park / Neutral Position Switch › Removal

Park / Neutral Position Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR 
  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    1. Using a screwdriver, pry out the lock washer.
    2. Remove the lock nut and lock washer.
    3. Remove the bolt and park/neutral position switch.
      Fig 1: Locating Lock Washer
      G05282753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault