Network Gateway Ecu: Installation
- INSTALL NETWORK GATEWAY ECU
- Install the network gateway ECU with the screw.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Connect the connector.
- INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
(See INSTALLATION
)
- INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(See INSTALLATION
)
- INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
(See INSTALLATION
)
- INSTALL FRONT DOOR SCUFF PLATE RH
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
NOTE:
Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION
).