Inspection Procedure

CHECK PANEL SWITCH
1. Check for foreign matter around the switches that might prevent operation.
  OK:
  
  No foreign matter is found.
NG: REMOVE ANY FOREIGN MATTER FOUND

OK: Go to Next Step
CHECK PANEL SWITCH (DISPLAY CHECK MODE)
1. Enter the "Display Check Mode" (Panel Switch Check) (See DISPLAY CHECK MODE ).
  
  Fig 1: Diagnostic Tool Display - Panel Switch Check Mode
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Operate the abnormal switch and check if the switch name and status are correctly displayed.
  OK:
  
  The switch name and status are correctly displayed as operated.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

OK: REPLACE MULTI-DISPLAY