FixVault
Home › Lexus › 2007 › RX 350 AWD › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH (PASSENGER SIDE) 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying Door Control Switch (Passenger Side)
      G05270482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION REFERENCE TABLE

      Tester Connection Condition Specified Condition
      2 - 3 Lock Below 1 Ω
      2 - 3
      1 - 2      		 OFF (Free) 10 kΩ or higher
      1 - 2 Unlock Below 1 Ω

      HINT:

      If the result is not as specified, replace the switch.

    2. Apply battery voltage to the door control switch and check that the switch illuminates.

      OK 

      MEASUREMENT CONNECTION SPECIFIED CONDITION REFERENCE TABLE

      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 4
      Battery negative (-) → Terminal 2      		 Illuminates
      Fig 2: Identifying Door Control Switch Illuminates
      G05270520Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      If the result is not as specified, replace the switch.

About FixVault