FixVault

Problem Symptoms Table

If a normal system code is displayed during the DTC check, but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant information.

HINT:

Inspect each malfunction circuit in numerical order for its corresponding symptom.

WIRELESS DOOR LOOK CONTROL SYSTEM: 

WIRELESS DOOR LOOK CONTROL SYSTEM

Symptom Suspected area Information
The wireless door lock control system does not operate. Perform the operation check. OPERATION CHECK 
Door control transmitter DOOR CONTROL TRANSMITTER 
Enter the self-diagnostic mode. DTC CHECK/CLEAR 
If the recognition code does not match the key code, check that the key code can be registered in the rewrite or add mode of the recognition code registration. -
Unlock warning switch circuit UNLOCK WARNING SWITCH CIRCUIT 
Door courtesy switch circuit DOOR COURTESY SWITCH CIRCUIT
Back door courtesy switch circuit BACK DOOR COURTESY SWITCH CIRCUIT 
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The panic alarm function only does not operate. Perform the operation check. OPERATION CHECK 
Door control transmitter DOOR CONTROL TRANSMITTER 
If the symptom still occurs after the above area has been inspected and proved to be normal, replace the multiplex network body ECU. -
The panic alarm function does not operate (Vehicle horn). Perform the operation check. OPERATION CHECK 
Horn system PROBLEM SYMPTOMS TABLE
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The panic alarm function does not operate (Security horn). Perform the operation check. OPERATION CHECK 
Theft deterrent system PROBLEM SYMPTOMS TABLE
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The panic alarm function does not operate (Hazard warning light) Perform the operation check. OPERATION CHECK 
Hazard warning switch HAZARD WARNING SWITCH
Wire harness -
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The panic alarm function does not operate (Headlight or taillight). Perform the operation check. OPERATION CHECK 
Lighting system PROBLEM SYMPTOMS TABLE
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The automatic lock function does not operate. Perform the operation check. OPERATION CHECK 
Unlock warning switch circuit UNLOCK WARNING SWITCH CIRCUIT 
Door courtesy switch circuit DOOR COURTESY SWITCH CIRCUIT
Back door courtesy switch circuit BACK DOOR COURTESY SWITCH CIRCUIT 
If the symptom still occurs after the above area have been inspected and proved to be normal, replace the multiplex network body ECU. -
The door ajar warning function only does not operate. Perform the operation check. OPERATION CHECK 
Unlock warning switch circuit UNLOCK WARNING SWITCH CIRCUIT 
Door courtesy switch circuit DOOR COURTESY SWITCH CIRCUIT
Back door courtesy switch circuit BACK DOOR COURTESY SWITCH CIRCUIT 
If the symptom still occurs after the above area have been inspected and proved to be normal, replace the multiplex network body ECU. -
The illuminated entry function only does not operate. Perform the operation check. OPERATION CHECK 
Lighting system PROBLEM SYMPTOMS TABLE
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The answer back function does not operate (Wireless door lock buzzer). Perform the operation check. OPERATION CHECK 
Wireless door lock buzzer circuit WIRELESS DOOR LOCK BUZZER CIRCUIT 
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The answer back function does not operate (Hazard warning light) Perform the operation check. OPERATION CHECK 
Hazard warning switch HAZARD WARNING SWITCH
Wire harness -
If the symptom still occurs after the above areas have been inspected and proved to be normal, replace the multiplex network body ECU. -
The wireless power back door opener function only does not operate. * Unlock warning switch circuit UNLOCK WARNING SWITCH CIRCUIT 
Back door courtesy switch circuit BACK DOOR COURTESY SWITCH CIRCUIT 
If the symptoms still occur after the above circuits are inspected and proved to be normal, replace the main body ECU RH (cowl side J/B RH). -
HINT:
*: with power back door