FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Back-Up Light Assembly › Installation

Back-Up Light Assembly: Installation

  1. INSTALL BACK-UP LIGHT ASSEMBLY 
    1. Connect each connector.
    2. Install the back-up light assembly with the 3 nuts and the clip.
      3. Fig 1: Identifying Back-Up Light Assembly With Nuts And Clip
      G05273973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY UPPER 
About FixVault