FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting › Headlight Assembly › Installation

Headlight Assembly: Installation

  1. INSTALL FRONT NO. 2 BUMPER SIDE SUPPORT 
    1. Engage the 2 claws and install the front No. 2 bumper side support.
      2. Fig 1: Installing Front Bumper Side Support No.2
      G05273903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL HEADLIGHT ASSEMBLY (for Halogen Headlight) 
    1. Connect the connector and clamp.
    2. Install the headlight assembly as shown in the illustration.
      Fig 2: Installing Headlight Assembly
      G05273950Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 3 bolts.
      4. Fig 3: Identifying Headlight Assembly Bolts
      G05273899Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL HEADLIGHT ASSEMBLY (for HID Headlight with AFS) 
    1. Connect the connector and clamp.
    2. Install the headlight assembly as shown in the illustration.
      Fig 4: Installing Headlight Assembly
      G05273950Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the 4 bolts.
      4. Fig 5: Identifying Headlight Assembly Bolts (For HID Headlight)
      G05273901Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL FRONT BUMPER ASSEMBLY 
  5. INSTALL FRONT BUMPER STAY CENTER 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight) 
  7. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See  ADJUSTMENT  ) 
  8. PREPARATION FOR HEADLIGHT AIMING (Using a tester) (See  ADJUSTMENT  ) 
  9. PREPARATION FOR HEADLIGHT AIMING (Using a screen) (See  ADJUSTMENT  ) 
  10. HEADLIGHT AIMING INSPECTION (See  ADJUSTMENT  ) 
  11. HEADLIGHT AIMING ADJUSTMENT (See  ADJUSTMENT  ) 
  12. VEHICLE PREPARATION FOR FOG LIGHT AIMING (See  ADJUSTMENT  ) 
  13. PREPARATION FOR FOG LIGHT AIMING (See  ADJUSTMENT  ) 
  14. FOG LIGHT AIMING INSPECTION (See  ADJUSTMENT  ) 
  15. FOG LIGHT AIMING ADJUSTMENT (See  ADJUSTMENT  ) 
About FixVault