FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Receiver › Installation

Door Control Receiver: Installation

  1. INSTALL DOOR CONTROL RECEIVER 
    1. Install the door control receiver with the bolt.
      2. Fig 1: Identifying Door Control Receiver Bolt
      G05270533Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER  (See INSTALLATION )
  3. INSTALL NO.2 ROOM LIGHT ASSEMBLY  (See INSTALLATION )
  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY  (See INSTALLATION )
  5. INSTALL ROPE HOOK  (See INSTALLATION )
  6. INSTALL REAR FLOOR FINISH SIDE PLATE  (See INSTALLATION )
  7. INSTALL REAR SEAT SIDE COVER  (See INSTALLATION )
  8. INSTALL REAR NO.1 SEAT BELT ASSEMBLY OUTER  (See INSTALLATION )
  9. INSTALL DECK SIDE TRIM COVER  (See INSTALLATION )
  10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP 
  11. INSTALL REAR DOOR SCUFF PLATE  (See INSTALLATION )
  12. INSTALL DECK SIDE TRIM BOX LH  (See INSTALLATION )
  13. INSTALL DECK SIDE TRIM BOX RH 
  14. INSTALL REAR FLOOR FINISH PLATE  (See INSTALLATION )
  15. INSTALL BACK DOOR WEATHERSTRIP 
  16. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  17. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  18. INSTALL DECK FLOOR BOX REAR  (See INSTALLATION )
  19. INSTALL DECK FLOOR BOX FRONT  (See INSTALLATION )
  20. INSTALL DECK BOARD SUB-ASSEMBLY  (See INSTALLATION )
  21. INSTALL TONNEAU COVER ASSEMBLY 
About FixVault