FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT DOOR CONTROL SWITCH (PASSENGER SIDE) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      2 - 3 Lock Below 1 Ω
      2 - 3 1 - 2 OFF (Free) 10 kΩ or higher
      1 - 2 Unlock Below 1 Ω

      HINT:

      If the result is not as specified, replace the switch.

      Fig 1: Inspecting Door Control Switch (Passenger Side)
      G05270482Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Apply battery voltage to the door control switch and check that the switch illuminates.

      OK 

    MEASUREMENT CONDITION AND SPECIFIED CONDITION

    Measurement Condition Specified Condition
    Battery positive (+) → Terminal 4
    Battery negative (-) → Terminal 2    		 Illuminates

    HINT:

    If the result is not as specified, replace the switch.

    Fig 2: Identifying Door Control Switch Connector Terminals And Switch Illumination
    G05270520Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault