Outer Rear View Mirror: Inspection

1. Inspect outer mirror motor operation.
   1. Remove the outer rear view mirror assembly.
   2. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 1 (RMVR) Battery negative (-) → Terminal 10 (RM+R)	Turns upward (A)
   Battery positive (+) → Terminal 10 (RM+R) Battery negative (-) → Terminal 1 (RMVR)	Turns downward (B)
   Battery positive (+) → Terminal 9 (RMHR) Battery negative (-) → Terminal 10 (RM+R)	Turns left (C)
   Battery positive (+) → Terminal 10 (RM+R) Battery negative (-) → Terminal 9 (RMHR)	Turns right (O)

   Fig 1: Identifying Outer Mirror Motor Connector Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Inspect outer mirror heater operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 4 (HTR+) Battery negative (-) → Terminal 12 (HTR-)	Mirror surface temperature becomes higher

3. Inspect electrochromic outer mirror operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard 

Fig 2: Identifying Electrochromic Outer Mirror Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect outer mirror motor operation.
   1. Remove the outer rear view mirror assembly.
   2. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 2 (MV) Battery negative (-) → Terminal 1 (MH)	Turns upward (A)
   Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 2 (MV)	Turns downward (B)
   Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 1 (MH)	Turns left (C)
   Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 6 (M+)	Turns right (0)

   Fig 3: Identifying Outer Mirror Motor Connector Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Inspect outer mirror heater operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 7 (HTR+) Battery negative (-) → Terminal 3 (HTR-)	Mirror surface temperature becomes higher

3. Inspect electrochromic outer mirror operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard 

Fig 4: Identifying Electrochromic Outer Mirror Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect outer mirror motor operation.
   1. Remove the outer rear view mirror assembly.
   2. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 1 (LMVR) Battery negative (-) → Terminal 10 (LM+R)	Turns upward (A)
   Battery positive (+) → Terminal 10 (LM+R) Battery negative (-) → Terminal 1 (LMVR)	Turns downward (B)
   Battery positive (+) → Terminal 9 (LMHR) Battery negative (-) → Terminal 10 (LM+R)	Turns left (C)
   Battery positive (+) → Terminal 10 (LM+R) Battery negative (-) → Terminal 9 (LMHR)	Turns right (D)

   Fig 5: Identifying Outer Mirror Motor Connector Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Inspect outer mirror heater operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 4 (HTR+) Battery negative (-) → Terminal 12 (HTR-)	Mirror surface temperature becomes higher

3. Inspect electrochromic outer mirror operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard 

Fig 6: Identifying Electrochromic Outer Mirror Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect outer mirror motor operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 2 (MV) Battery negative (-) → Terminal 1 (MH)	Turns upward (A)
   Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 2 (MV)	Turns downward (B)
   Battery positive (+) → Terminal 6 (M+) Battery negative (-) → Terminal 1 (MH)	Turns left (C)
   Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 6 (M+)	Turns right (D)

   Fig 7: Identifying Outer Mirror Motor Connector Terminals

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Inspect outer mirror heater operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

   Standard 

   MEASUREMENT CONDITION CHART
   
   

   Measurement Condition	Specified Condition
   Battery positive (+) → Terminal 7 (HTR+) Battery negative (-) → Terminal 3 (HTR-)	Mirror surface temperature becomes higher

3. Inspect electrochromic outer mirror operation.
   1. Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

Standard 

Fig 8: Identifying Electrochromic Outer Mirror Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002