Seat Memory Switch: Inspection

INSPECT SEAT MEMORY SWITCH

Measure the resistance according to the value(s) in the table below.

Fig 1: Identifying Seat Memory Switch Connector Terminals

G05141806

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Resistance

TESTER CONNECTION AND SPECIFIED CONDITION

Tester Connection	Switch Position	Specified Condition
1(E) - 2(MMRY)	SET switch ON (pushed)	Below 1 Ω
1(E) - 2(MMRY)	SET switch OFF (not pushed)	10 kΩ or higher
1(E) - 4(1)	SW1 switch ON (pushed)	Below 1 Ω
1(E) - 4<1)	SW1 switch OFF (not pushed)	10 kΩ or higher
1(E) - 3(2)	SW2 switch ON (pushed)	Below 1 Ω
1(E) - 3(2)	SW2 switch OFF (not pushed)	10 kΩ or higher

If the result is not as specified, replace the switch.