FixVault

Data List / Active Test

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST on the tester's screen.

      Main body ECU 

      MAIN BODY ECU DATA LIST REFERENCE

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      D DOR CTY SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door is open
      OFF: Driver side door is closed
      -
      D LOCK POS SW Driver side door lock position switch signal / ON or OFF ON: Driver side door is unlocked
      OFF: Driver side door is locked
      -
      D/L SW-LOCK Door manual lock switch signal ON or OFF ON: Door control switch on power window regulator master switch is pushed to lock position
      OFF: Door control switch on power window regulator master switch is not pushed
      -
      D/L SW UNLOCK Door manual unlock switch signal / ON or OFF ON: Door control switch on power window regulator master switch is pushed to unlock position
      OFF: Door control switch on power window regulator master switch is not pushed
      -
      DOR KEY SW-LOCK Door key linked lock switch signal / ON or OFF ON: Driver side door key cylinder is turned to lock position
      OFF: Driver side door key cylinder is not turned
      -
      D DOR KEY SW-UL Door key linked lock switch signal / ON or OFF ON: Driver side door key cylinder is turned to unlock position
      OFF: Driver side door key cylinder is not turned
      -
      P DOR CTY SW Passenger side door courtesy light signal / ON or OFF ON: Passenger side door is open
      OFF: Passenger side door is closed
      -
      P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door is unlocked
      OFF: Passenger side door is locked
      -
      RR DOR CTY SW Rear door RH courtesy light switch signal / ON or OFF ON: Rear door RH is open
      OFF: Rear door RH is closed
      -
      RL DOR CTY SW Rear door LH courtesy light switch signal / ON or OFF ON: Rear door LH is open
      OFF: Rear door LH is closed
      -
      BK DOR CTY SW Back door courtesy light switch signal / ON or OFF ON: Back door is open
      OFF: Back door is closed
      -
      KEY UNLK WRN SW Unlock warning switch signal / ON or OFF ON: Key is in ignition key cylinder
      OFF: No key is in ignition key cylinder
      -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Perform the ACTIVE TEST according to the display on the tester.

      Main body ECU 

      MAIN BODY ECU ACTIVE TEST REFERENCE

      Item Test Details Diagnostic Note
      DOOR LOCK Operate door lock motor LOCK/UNLOCK -
      D DOOR UNLOCK Operate driver side door unlock ON / OFF -