How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock system is operating normally. Check the power door lock system first before troubleshooting the wireless door lock control system (see OPERATION CHECK ).
Use these procedures to troubleshoot the wireless door lock control system.
*: Use the intelligent tester.

VEHICLE BROUGHT TO WORKSHOP

INSPECT BATTERY VOLTAGE
Standard voltage: 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

PROBLEM SYMPTOMS TABLE

Result:

RESULT REFERENCE

Result	Proceed to
Fault is not listed in problem symptoms table	A
Fault is listed in problem symptoms table	B

B: Go to step 5

A: Go TO NEXT STEP.

OVERALL ANALYSIS AND TROUBLESHOOTING*

REPAIR OR REPLACE

CONFIRMATION TEST
END