FixVault

License Plate Light Assembly: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Install the light as shown in the illustration.
      Fig 1: Installing License Plate Light Assembly
      G04490851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR LOWER OUTSIDE GARNISH SUB-ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL BACK DOOR TRIM BOARD (See  REASSEMBLY  ) 
  4. INSTALL BACK DOOR SIDE GARNISH RH (See  REASSEMBLY  ) 
  5. INSTALL BACK DOOR SIDE GARNISH LH (See  REASSEMBLY  ) 
  6. INSTALL BACK DOOR CENTER GARNISH (See  REASSEMBLY  ) 
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL