FixVault

Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

After the inspection is completed, clear the DTCs.

NOTE:
  • This code may be output even when a malfunction does not exist,
  • When this code is output frequently, replace the radio receiver.
  1. CLEAR DTC 
    1. Clear the DTC (see DTC CHECK /CLEAR ).

      HINT:

      These DTCs do not indicate a malfunction.

  2. RECHECK DTC 
    1. Recheck the DTC and check if the same trouble code occurs again.

    OK: 

    Malfunction disappears. 

    NG: REPLACE RADIO RECEIVER ASSEMBLY 

    OK: END