Ignition Switch: Inspection
WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT IGNITION OR STARTER SWITCH ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard resistance
IGNITION OR STARTER SWITCH ASSEMBLY
| Condition |
Tester Connection |
Standard |
| LOCK |
Between all terminals |
10 k ohms or higher |
| ACC |
2-4 |
Below 1 ohms |
| ON |
1-2-4 |
Below 1 ohms |
| 5-6 |
| START |
1-3-4 |
Below 1 ohms |
| 5-6-7 |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002