Ignition Switch: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE STEERING COLUMN COVER
1. Turn the steering wheel to the right and remove the screw.
  
  Fig 1: Locating Steering Wheel Screw (1 Of 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the steering wheel to the left and remove the screw.
  
  Fig 2: Locating Steering Wheel Screw (2 Of 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the screw and remove the steering column cover.
  
  Fig 3: Locating Steering Column Cover Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE IGNITION OR STARTER SWITCH ASSEMBLY
1. Disconnect the connector.
2. Disengage the 2 claws and remove the ignition or starter switch assembly.
  
  Fig 4: Locating Ignition Or Starter Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002