Ignition Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL IGNITION SWITCH ASSEMBLY
1. Connect the connector.
2. Install the ignition switch with the 2 screws.
  
  Fig 1: Identifying Ignition Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)