Section 285 (Power Outlets): Clock: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CLOCK ASSEMBLY
1. Engage the 2 claws and install the clock assembly.
  HINT:
  
  Push the clock assembly in the direction shown in the figure below, to install it.
  
  Fig 1: Identifying Clock Assembly Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIO RECEIVER ASSEMBLY (See INSTALLATION )
INSTALL INTEGRATION CONTROL PANEL ASSEMBLY (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH RH (See INSTALLATION )
INSTALL INSTRUMENT PANEL GARNISH LH (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)