Headlight Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEADLIGHT ASSEMBLY
1. Install the headlight onto the vehicle.
2. Tighten the 3 screws.
3. Connect the 2 connectors.
INSTALL FRONT BUMPER FILLER
1. Engage the 2 claws and clip and install the front bumper filler.
Fig 2: Identifying Claws, Clip And Front Bumper Filler
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RADIATOR GRILLE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)