FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › External Pages › Different car › Section 305 (Lighting) › Headlight Assembly › Reassembly

Headlight Assembly: Reassembly

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT TURN SIGNAL LIGHT BULB 
    1. Install the front turn signal light bulb into the light socket.
      2. Fig 1: Identifying Front Turn Signal Light Bulb Into Light Socket
      G05113589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the front turn signal light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  2. INSTALL HEADLIGHT, NO. 1 BULB 
    1. Install the headlight, No. 1 bulb.
      Fig 2: Identifying Headlight, No. 1 Bulb
      G05113582Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Lock the set spring by moving it in the directions indicated by the arrows in the illustration.
      Fig 3: Identifying Set Spring
      G05113591Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the socket cover.
      Fig 4: Identifying Socket Cover
      G05113580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL HEADLIGHT ASSEMBLY 
    1. Install the headlight with the 3 nuts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      Fig 5: Identifying Headlight And Nuts
      G05113579Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault