Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

When the customer requests modification of items, first make sure that the functions can be customized.
Make a note of the current settings before customization.
When troubleshooting items, first make sure that the functions are set to their default settings.

The following items can be customized.

Illuminated Entry:

ILLUMINATED ENTRY

Display	Default	Contents	Setting
Lighting Time	15 (second)	Changes illumination duration after door closure. (It will quickly fade out in case of turning the ignition switch ON)	7.5/15/30 (second)
I/L ON W/Door Key Unlock	ON	Function to light up the room light, when unlocking with the door key cylinder. (Room light illuminated when room light switch in DOOR position)	ON / OFF
I/L when ACC OFF	ON	Illuminates light when ignition switch turned from ACC to LOCK. (Room light illuminated when room light switch in DOOR position)	ON / OFF

Light Control:

LIGHT CONTROL

Display (Item)	Default	Contents	Setting
Light Auto OFF Delay	30 (second)	Function to keep on lighting the headlight for a certain period of time after closing all the doors with the ignition switch turned OFF from ON under the condition that the light control switch is at HEAD or AUTO with the headlight ON.	OFF/ 30/ 60/ 90 (second)

HINT:

Sensitivity adjustment can hardly be confirmed. Please check by customer's actual driving.