Room Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ROOM LIGHT ASSEMBLY
1. Install room light bulb No. 1.
2. Engage the 4 claws and install the room light switch base.
3. Install the roof wire into the claw of the room light.
4. Engage the 4 claws and install the room light.
5. Engage the 4 claws and install the 2 covers.
  
  Fig 3: Identifying Room Light Lens Covers & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Engage the 4 claws and install the room light lens.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)