FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › External Pages › Different car › Section 316 (Cruise Control System) › Cruise Control System › DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CHECK 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect a Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester ON.
    4. Enter the following menus: Select: Powertrain / Cruise Control / Trouble Codes.
    5. Erase the DTCs.
About FixVault