Accelerator Pedal Rod: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ACCELERATOR PEDAL ROD
1. Install the accelerator pedal rod with the 2 bolts.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 1: Identifying Accelerator Pedal Rod Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the accelerator pedal position sensor connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL