FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › External Pages › Different car › Section 332 (Brake Control) › Steering Angle Sensor › Inspection

Steering Angle Sensor: Inspection

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STEERING ANGLE SENSOR 
    1. Inspect the sensor. If any of the following occurs, replace the sensor with a new one:
      • The surface of the sensor is cracked, dented, or chipped.
      • The connector or wire harness is scratched, cracked, or damaged.
      • The sensor has been dropped.
About FixVault