FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › External Pages › Different car › Section 40 (Engine Immobilizer) › DTC Check / Clear › Notes

DTC Check / Clear: Notes

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.
      Fig 1: Connecting Intelligent Tester To DLC3
      G04114759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the ignition switch on.
    3. Turn the tester ON.
    4. Enter the following menu items: DIAGNOSIS / OBD/MOBD / IMMOBILIZER / DTC INFO / CURRENT CODES.
    5. Check the DTC(s) and freeze frame data, and then write down.
    6. Check the details of the DTC(s) (See DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR THE DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch on.
    3. Turn the tester ON.
    4. Enter the following menu items: DIAGNOSIS / OBD/ MOBD / IMMOBILIZER / DTC INFO / CLEAR CODES.
    5. Press the YES button.
About FixVault