FixVault
Home › Lexus › 2007 › RX 400h AWD › Repair and Diagnosis › External Pages › Different car › Section 779 (Brake Control (Service Information)) › VSC Off Switch › Inspection › Inspection

VSC Off Switch: Inspection: Inspection

WARNING: This page is about a different car, the 2010 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Identifying VSC OFF Switch Connector Terminals
      GTY227961Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      6 - 9 Not pushed 10 kΩ or higher
      Pushed in Below 1 Ω

      If the result is not as specified, replace the VSC OFF switch.

About FixVault