Data List / Active Test

1. DATA LIST 
   1. The wireless door lock control data list can be displayed while the intelligent tester is connected to the DLC3 with the ignition switch in the ON position. Follow the prompts on the tester screen to access the DATA LIST.

   BODY: 

   DATA LIST - BODY
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   IG SW	Ignition switch (IG) / ON or OFF	ON: Ignition switch ON or START OFF: Ignition switch OFF or ACC	-
   ACC SW	Ignition switch (ACC) / ON or OFF	ON: Ignition switch ACC OFF: Ignition switch in any position except ACC	-
   KEY UNLK WRN SW	Unlock warning switch / ON or OFF	ON: Ignition key is inserted OFF: Ignition key is not inserted	-
   WIRELESS OPER	Wireless door lock control function / ON or OFF	ON: Operates OFF: Does not operate	-
   HAZARD ANS BACK	Hazard answer-back of wireless / ON or OFF	ON: Operates OFF: Does not operate	-
   OPEN DOOR WARN	Open door warning / ON or OFF	ON: Operates OFF: Does not operate	-
   AUTO LOCK DELAY	Automatic lock time / 30s, 60s, 120s or OFF	30 s: 30 seconds 60 s: 60 seconds 120 s: 120 seconds OFF: Does not operate	-
   UNLOCK/2OPER	2 times operation of wireless unlock/ON or OFF	ON: All doors unlock when UNLOCK pressed twice OFF: All doors unlock when UNLOCK pressed once	-
   ALARM FUNCTION	Panic function / ON or OFF	ON: Operates OFF: Does not operate	-
   WIRLS BUZZ RESP	Wireless door lock buzzer response / ON or OFF	ON: Operates OFF: Does not operate	-
   D DOR CTY SW	Driver side door courtesy light switch / ON or OFF	ON: Door is opened OFF: Door is closed	-
   P DOR CTY SW	Passenger side door courtesy light switch / ON or OFF	ON: Door is opened OFF: Door is closed	-
   Rr DOR CTY SW	Rear door courtesy light switch / ON or OFF	ON: Either LH or RH door is opened OFF: Both LH and RH doors are closed	-
   P LOCK POS SW	Passenger side door lock position switch / ON or OFF	ON: Door lock is in the unlock position OFF: Door lock is in the lock position	-
   Rr LOCK POS SW	Rear door lock position switch / ON or OFF	ON: Door lock is in the unlock position OFF: Door lock is in the lock position	-

2. ACTIVE TEST 

   HINT:

   Performing the ACTIVE TEST using the intelligent tester allows components such as the relay, VSV and actuator to operate without removing parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.

   It is possible to display the DATA LIST during the ACTIVE TEST.

   1. Connect the intelligent tester to the DLC3.
   2. Turn the ignition switch to the ON position.
   3. According to the display on the tester, preform the ACTIVE TEST.

   HINT:

   The ignition switch must be turned to the ON position to proceed with the ACTIVE TEST using the intelligent tester.

BODY: