Inspection Procedure

WARNING: This page is about a different car, the 2007 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

When using the intelligent tester, start from 1. When not using the intelligent tester, start from 2.

PERFORM ACTIVE TEST BY INTELLIGENT TESTER (HEADLIGHT RELAY)
1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Check that the headlight relay operates using the ACTIVE TEST (see DATA LIST/ACTIVE TEST ).
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
- NG: GO TO NEXT STEP
CHECK HEADLIGHT RELAY CIRCUIT
- NG: REPLACE ENGINE ROOM JUNCTION BLOCK ASSEMBLY
- OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE