FixVault
Home › Lexus › 2007 › RX 400h FWD › Repair and Diagnosis › External Pages › Different car › Section 13 (Engine Control System (3MZ-FE)) › Crankshaft Position Sensor › Inspection

Crankshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance 

      SPECIFIED CONDITION REFERENCE

      Temperature Specified Condition
      Cold 1,630 to 2,740 Ω
      Hot 2,065 to 3,225 Ω
      Fig 1: Inspecting Crankshaft Position Sensor Connector Terminal
      G04110861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • "Cold" and "Hot" mean the temperature of the coils themselves.
      • "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

      If the resistance is not as specified, replace the sensor.

About FixVault