DTC Check/Clear

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.
4. Check the DTCs on the tester screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Erase the DTCs by following the prompts on the tester screen.
4. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.
  HINT:
  
  Refer to the Techstream operator's manual for further details.