Power Window Master Switch: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
1. Install the power window regulator master switch with the 3 screws.
  
  Fig 1: Identifying Power Window Regulator Master Switch Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT ARMREST BASE UPPER PANEL
1. Connect the connector.
2. Engage the 3 claws and clip and install the front armrest base upper panel.
Fig 2: Identifying Front Armrest Base Upper Panel Claws And Clip
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)