FixVault
Home › Lexus › 2007 › RX 400h FWD › Repair and Diagnosis › External Pages › Different car › Section 317 (Windshield/Window Glass) › Window Defogger Switch › Inspection

Window Defogger Switch: Inspection

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY 
    1. Check the operation of the window defogger switch indicator.
      1. Connect the positive (+) battery lead to terminal 1 and negative (-) battery lead to terminal 20, then check the indicator operation.

        Standard 

        SWITCH CONDITION

        Switch Condition Specified Condition
        ON Indicator illuminates
        OFF Indicator turns off
        Fig 1: Identifying Operation Of Window Defogger Switch Indicator
        G05114366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the integration control and panel.

      2. Under the above condition, connect the positive (+.) battery lead to terminal 2, then check the indicator operation.

        Standard 

        SWITCH CONDITION

        Switch Condition Specified Condition
        ON Indicator Dims
        OFF Indicator turns off
        Fig 2: Identifying Indicator Operation
        G05114367Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the integration control and panel.

About FixVault