FixVault
Home › Lexus › 2007 › RX 400h FWD › Repair and Diagnosis › External Pages › Different car › Section 319 (Meter) › Combination Meter › Installation

Combination Meter: Installation

WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
    2. Attach the 2 clips to install the combination meter.
    3. Install the 2 screws.
      Fig 1: Attaching Clips
      G05586227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Attach the 4 clips and 6 claws to install the instrument cluster finish panel.
      2. Fig 2: Attaching Clips
      G05586225Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
About FixVault