FixVault
Home › Lexus › 2007 › SC 430 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Key Reminder Warning System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST on the tester's screen.
      Fig 1: Connecting Cable Of Intelligent Tester To DLC3
      G05292948Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Transponder key ECU: 

      TRANSPONDER KEY ECU REFERENCE CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      KEY SW Key unlock warning switch signal / ON or OFF ON: Key is in ignition key cylinder
      OFF: No key is in ignition key cylinder      		 -

      Multiplex network front door ECU LH: 

      MULTIPLEX NETWORK FRONT DOOR ECU LH REFERENCE CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      LOCK POS SW Door unlock detection switch signal / ON or OFF ON: Door is unlocked
      OFF: Door is locked      		 -
      COURTESY SW Door courtesy switch signal / ON or OFF ON: Door is open
      OFF: Door is closed      		 -

      Multiplex network front door ECU RH: 

      MULTIPLEX NETWORK FRONT DOOR ECU RH REFERENCE CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      LOCK POS SW Door unlock detection switch signal / ON or OFF ON: Door is unlocked
      OFF: Door is locked      		 -
      COURTESY SW Door courtesy switch signal / ON or OFF ON: Door is open
      OFF: Door is closed      		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

    The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Perform the ACTIVE TEST according to the display on the tester.

      Multiplex network front door ECU LH: 

      MULTIPLEX NETWORK FRONT DOOR ECU LH REFERENCE CHART

      Item Test Details Diagnostic Note
      DOOR LOCK Operate door lock motor / OFF, LOCK or UNLOCK -
About FixVault