Customize Parameters
- CUSTOMIZING WITH INTELLIGENT TESTER NOTE:
- When the customer requests a change in a function, first make sure that the function(s) can be customized.
- Be sure to make a note of the current setting before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
Theft deterrent system:
CUSTOMIZE PARAMETERSDisplay (Item) Default Contents Setting PASSIVE MODE (Passive arming mode) OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to arming state 30 seconds after key is removed from ignition key cylinder and driver side door is closed, even if doors are not locked by wireless or door key lock operation
In PASSIVE MODE, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see ENTRY DELAY below) after door is opened:- Unlock any door by key or wireless operation
- Reconnect battery
- Insert key into ignition key cylinder and turn ignition switch from OFF to ON
ON / OFF WARNING (HORN) (Warning (horn)) ON Function that allows vehicle horn and security horn to be able to be used as warning device ON / OFF ENTRY DELAY (Entry delay time) 14 s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s - SELECTING PASSIVE MODE WITHOUT INTELLIGENT TESTER
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HINT:
- Initial mode is PASSIVE MODE OFF.
- If the ignition switch is turned ON, the changing operation will be canceled.
- *: Entry delay time