Data List / Active Test

Using the intelligent tester to perform Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Warm up the engine.
2. Turn the ignition switch OFF.
3. Connect the intelligent tester (with CAN VIM) to the DLC3.
4. Turn the ignition switch ON.
5. Turn the tester on.
6. Enter the following menus: DIAGNOSIS/OBD/ MOBD/COMBINATION METER/ACTIVE TEST/
7. According to the display on tester, perform the "ACTIVE TEST".

   Combination meter: 

   ACTIVE TEST DETAIL - COMBINATION METER
   
   

   Tester Display	Test Part	Control Range
   D-BELT REMIND*	Driver seat belt warning light	ON or OFF
   P-BELT REMIND*	Front passenger seat belt warning light	ON or OFF
   HINT: *: Confirm that the vehicle is stopped with the engine idling.