Door Control Transmitter: Installation

INSTALL TRANSMITTER BATTERY
1. Install a new battery (lithium battery) with the positive (+) side up as shown in the illustration.
  
  Fig 1: Installing Transmitter Battery (Lithium Battery) With Positive (+) Side Up
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Press down gently on the battery to set it in place.
  
  Fig 2: Setting Transmitter Battery By Pressing Down Gently
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Be sure that the positive and negative sides of the transmitter battery are positioned correctly.
  - Be careful not to bend the terminals of the transmitter battery during installation.
  - Keep the interior of the transmitter case free of dust, water and oil.
3. Install the cover by pressing down on it as shown in the illustration.
  
  Fig 3: Installing Cover By Pressing Down
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the mechanical key.
  HINT:
  
  After the installation, press one of the transmitter's switches and check that the LED illuminates.
  
  Fig 4: Installing Mechanical Key
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002