Customize Parameters

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

Before attempting to customize vehicle settings, confirm whether it is possible to make the change that the customer has requested.
Be sure to record the current settings before customizing.
When troubleshooting, make sure that the item in question has not been disabled using the customizing function.

Connect Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the tester on.
Enter the following menus: Customize Setting / Door Lock.

Select the setting by referring to the table below.

Door Lock:

DOOR LOCK CUSTOMIZE PARAMETERS

Tester Display	Default	Contents	Setting
Auto Unlk/Shift (Unlock w/ engine switch on (IG), shift P, speed 0 km/h (0 mph))	ON	Function that unlocks doors when the shift lever is moved to the P position from any other position while the engine switch is on (IG)	ON/OFF
All Unlk/Opn-CI (All unlock w/ D door open-close)	OFF	Function that unlocks all other doors when opening driver side door within 10 seconds after turning the engine switch off from on (IG)	ON/OFF
Unlk/Key Twice (Unlock w/ 2 times D key operation)	ON	Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice In the OFF setting, turning it once unlocks all doors	ON/OFF
Auto Lock/Shift (Auto lock/shift not P)	ON	Function that locks doors when the shift lever is moved from the P position to any other position	ON/OFF
Auto Lock	OFF	Function that locks doors when vehicle reaches a vehicle speed 20 km/h (13 mph)	ON/OFF

Wireless D Lock:

WIRELESS D LOCK CUSTOMIZE PARAMETERS

Tester Display	Default	Contents	Setting
Auto Lock Delay	60s	Function that selects AUTO LOCK time (30 sec or 60 sec.)	30s/60s