FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Wireless Door Lock Control System › Data List / Active Test

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using Techstream to read the Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: Body Electrical / Main Body or Smart Key / Data List.
    4. Read the DATA LIST according to the display on the tester.

      Main Body (Main body ECU): 

      MAIN BODY DATA LIST

      Tester Display Measurement Item/Range Normal Condition
      Wireless Control Wireless door lock control function / ON or OFF ON: Operating
      OFF: Not operating
      Hazard Answer Back Hazard answer-back of wireless / ON or OFF ON: Operating
      OFF: Not operating
      Open Door Warning Open door warning / ON or OFF ON: Operating
      OFF: Not operating
      Auto Lock Time Automatic lock time /120 s, 60 s or 30 s 120 s: 120 seconds
      60 s. 60 seconds
      30 s 30 seconds
      Unlock 2 Operation 2 times operation of wireless unlock / ON or OFF ON: All doors unlock when UNLOCK is pressed twice
      OFF: All doors unlock when UNLOCK is pressed once
      Trunk Lid Operation Luggage compartment door open function type / 1tim ON/2tim ON/ 0 8 s/ OFF 1tim ON: Luggage compartment door opens when LUGGAGE OPEN switch is pressed once
      2tim ON: Luggage compartment door opens when LUGGAGE OPEN switch is pressed twice
      0.8 s Luggage compartment door opens when LUGGAGE OPEN switch is pressed and held down for 0.8 seconds
      OFF: Not operating

      Smart Key (Certification ECU (Smart Key ECU Assembly)): 

      SMART KEY (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)) DATA LIST

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Panic Alarm Function Panic function / ON or OFF ON: Operating
      OFF: Not operating      		 -
      Wireless Buzzer Volume Wireless buzzer volume / LEVEL0 to LEVEL7 LEVEL7: Biggest volume
      LEVEL6
      LEVEL5
      LEVEL4
      LEVEL3
      LEVEL2
      LEVEL1: Smallest volume
      LEVEL0: No sound      		 -
  2. ACTIVE TEST 

    HINT:

    Using Techstream to perform Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Test early in troubleshooting is one way to save diagnostic time. The Data List can be displayed during the Active Test.

    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: Body Electrical / Main Body or Smart Key / Active Test.
    4. Perform the ACTIVE TEST according to the display on the tester.

      Main Body (Main body ECU): 

      MAIN BODY ACTIVE TEST REFERENCE

      Tester Display Test Part Control Range Diagnostic Note
      Hazard Turns the turn signal flasher relay ON/OFF Observe headlight and rear combination light for correct operation
      Vehicle Horn Turns the vehicle horns ON/OFF -
      Trunk and Back-Door Open Turns the luggage compartment door opener motor ON/OFF Observe luggage compartment door

      Smart Key (Certification ECU (Smart Key ECU Assembly)): 

      SMART KEY (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)) ACTIVE TEST REFERENCE

      Tester Display Test Part Control Range Diagnostic Note
      Wireless Buzzer Operation Turns the wireless door lock buzzer ON/OFF -
About FixVault