FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Body & Frame › Mirrors › Mirror › Outer Mirror Control Ecu › Installation

Outer Mirror Control Ecu: Installation

  1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY 
    1. Install the outer mirror control ECU assembly with the nut.
    2. Connect the 2 connectors.
      3. Fig 1: Locating Outer Mirror Control ECU Assembly Connector & Nut
      G05253749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL RH  (See INSTALLATION )
  3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  4. INSTALL SIDE INSTRUMENT PANEL RH  (See INSTALLATION )
  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER RH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE RH  (See INSTALLATION )
  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
  11. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

About FixVault