Outer Mirror Control Ecu: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See PRECAUTION
).
- REMOVE INSTRUMENT PANEL FINISH PANEL END RH
(See REMOVAL
)
- REMOVE FRONT DOOR SCUFF PLATE RH
(See REMOVAL
)
- REMOVE FRONT DOOR OPENING TRIM COVER RH
(See REMOVAL
)
- REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE SIDE INSTRUMENT PANEL RH
(See REMOVAL
)
- REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
(See REMOVAL
)
- REMOVE LOWER INSTRUMENT PANEL RH
(See REMOVAL
)
- REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY
- Disconnect the 2 connectors.
- Remove the nut and the outer mirror control ECU assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002