FixVault
Home › Lexus › 2008 › ES 350 › Repair and Diagnosis › Body & Frame › Mirrors › Mirror › Outer Rear View Mirror › Inspection

Outer Rear View Mirror: Inspection

  1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH 
    1. Inspect outer mirror motor operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and graphic below
        Fig 1: Identifying Terminals Of Outer Mirror Motor H4 Connector
        G05253732Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 1 (MV)
        Battery negative (-) → Terminal 10 (M+)        		 Turns upward (A)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 1 (MV)        		 Turns downward (B)
        Battery positive (+) → Terminal 9 (MH)
        Battery negative (-) → Terminal 10 (M+)        		 Turns left (C)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 9 (MH)        		 Turns right (D)
    2. Inspect retractable mirror operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 11 (MF)
        Battery negative (-) → Terminal 3 (MR)        		 Returns (Driving position)
        Battery positive (+) → Terminal 3 (MR)
        Battery negative (-) → Terminal 11 (MF)        		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (HTR+)
        Battery negative (-) → Terminal 12 (HTR-)        		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and graphic below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (EC+)
        Battery negative (-) → Terminal 15 (EC)        		 Mirror surface changes to dark
        Fig 2: Identifying Terminals Of Electrochromic Outer Mirror Connector
        G05253733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH 
    1. Inspect outer mirror motor operation.
      1. Remove the outer rear view mirror assembly.
      2. Apply battery voltage and check operation of the mirror face, as shown in the table and graphic below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 1 (MV)
        Battery negative (-) → Terminal 10 (M+)        		 Turns upward (A)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 1 (MV)        		 Turns downward (B)
        Battery positive (+) → Terminal 9 (MH)
        Battery negative (-) → Terminal 10 (M+)        		 Turns left (C)
        Battery positive (+) → Terminal 10 (M+)
        Battery negative (-) → Terminal 9 (MH)        		 Turns right (D)
        Fig 3: Identifying Terminals Of Outer Mirror Motor Connector
        G05253734Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect retractable mirror motor operation.
      1. Apply battery voltage and check operation of the mirror, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 11 (MF)
        Battery negative (-) → Terminal 3 (MR)        		 Returns (Driving position)
        Battery positive (+) → Terminal 3 (MR)
        Battery negative (-) → Terminal 11 (MF)        		 Retracts
    3. Inspect outer mirror heater operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 4 (HTR+)
        Battery negative (-) → Terminal 12 (HTR-)        		 Mirror surface temperature becomes higher
    4. Inspect electrochromic outer mirror operation.
      1. Apply battery voltage and check operation of the mirror face, as shown in the table and graphic below.

        Standard 

        MEASUREMENT CONDITION SPECIFIED CONDITION

        Measurement Condition Specified Condition
        Battery positive (+) → Terminal 7 (EC+)
        Battery negative (-) → Terminal 15 (EC-)        		 Mirror surface changes to dark
        Fig 4: Identifying Terminals Of Electrochromic Outer Mirror Connector
        G05253735Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault